Advanced Laser Hardening for High-Precision Gears
In power transmission and heavy machinery, gears are the heart of the system. They must withstand severe bending stress, high-speed contact fatigue, and sudden shock loads. Traditional heat treatment methods often compromise gear geometry due to excessive thermal distortion, leading to expensive and time-consuming post-weld grinding.
Our CNC/Robot Laser Quenching (Laser Hardening) technology offers a revolutionary solution. By delivering localized, high-density energy precisely where it’s needed, we achieve superior surface hardness while keeping gear deformation close to zero.

Solving the 3 Major Pain Points of Gear Heat Treatment
Traditional induction hardening and carburizing have served the industry for decades, but they come with severe limitations that increase your manufacturing costs:
Excessive Thermal Distortion:
High heat input warps gear teeth, especially in thin-walled or large-diameter gears. This forces manufacturers to leave large grinding allowances and spend heavily on post-quench tooth grinding .
Uneven Hardness & “Overburning”:
Induction hardening often causes eddy currents to concentrate at the gear tip, leading to brittle, overburned tooth tips, while leaving the tooth root under-hardened and prone to fatigue breakage.
Lack of Selective Hardening:
For optimum performance, only the tooth flanks and roots need high wear resistance, while the gear core must remain tough. Traditional methods struggle to achieve this precise boundary.
The Laser Advantage: True Contour Hardening
Both multi-axis robotic and CNC laser quenching system paths are custom-programmed to follow the exact profile of the gear teeth.
Precise Profile Tracking:
The laser beam scans flawlessly from the tooth tip, down the flank, and through the root, ensuring a uniform hardened layer along the entire load-bearing surface.
Self-Quenching Mechanism:
The laser heats the surface instantly, and the massive cold core of the gear acts as a heat sink, quenching the material naturally without quenching media (water or oil).
Zero-Distortion Manufacturing:
Because the overall thermal input is extremely low, gear distortion is virtually eliminated. In many cases, gears can go straight from laser quenching to final assembly, skipping the grinding phase entirely.
Gear Laser Hardening Test Report
Laser parameters:
Power:2400W; Speed: 5mm/s; Spot size: 20*2mm;
Test workpiece:
Gear, raw material #45 steel, original hardness of 180~230HBW, after laser quenching hardness 55HRC, Hardness depth of 0.8mm
Machine used for this application:
CNC Laser Laser Hardening Machine

CNC Laser Hardening Machine
Multi-Axis CNC Control: Automated Hardening Solutions for Diverse Industrial Components
Test Video
Broad Industry Applications for Laser-Hardened Gears
Our laser hardening technology is widely adopted across various demanding sectors, significantly extending gear service life:
*Agricultural Machinery: Drive shafts and small gear hubs subjected to severe abrasive wear from soil and debris.
*Automotive & Transmission: High-speed transmission gears requiring quiet operation and minimal geometric error.
*Heavy Industrial & Mining: Heavy-duty reduction gears, spur gears, and bevel gears that demand high load capacity and anti-pitting performance.
*Wind Power & Energy: Large-diameter ring gears and pinion gears requiring extreme fatigue resistance under shifting wind loads.
Optimize Your Gear Manufacturing with Us
Stop wasting time and budget on post-quench corrections. Whether you are dealing with small shafts or heavy-duty industrial gears, our laser cladding and quenching systems deliver the precision your project demands.
If you would like to see how these solutions stack up for your specific gear components, we can compare them by hardness profiles, material compatibility, and estimated grinding cost savings. Would that help?
Get a Free Technical Proposal for Your Agricultural Components
Whether you need to harden custom axles for new farming OEM equipment, or repair worn bearing seats for maintenance, our engineers are ready to tailor the perfect metallurgical solution for you. Send us your drawings today!
Tel:+86 18730490682 | Email: alvin@boaolaser.com | We typically respond within 2 hours
